1.00Does anyone know a company that will lay vinyl flooring over old laminate?
Q.I can't take up the laminate because the underneath would have to be completely redone. On a website I read that it is possible to lay flooring over laminate. Anyone with experience in doing this?????????????
THANK YOU!
A.Not directly over the laminate. The laminate seams will show through in no time. If a luan(1/4" plywood) is layed over it and nails driven all the way to the sub floor, then yes you can do it.
Any questions you can e mail me through my avatar.GL
1.00Is it difficult in putting down laminate hardwood flooring?
Q.My husband and I were comparing the costs of putting down laminate hardwood flooring ourselves. We would like to save some money in doing so but have never attempted in such a task. How hard is it in putting the flooring down? What company offers the best prices per square footage?
A.Good Day
Yes , Go a head a do it together. It will be a experience that you both will enjoy. You will have to make sure your floor has the proper under cushion for where you are laying it. In the basement you will need a vapour barrier under cushion.Just ask a few questions where you buy your laminate flooring. Shop around , if you know how many square feet you will need you can ask if the have any laminate that they will mark down to get rid of . It sometimes works and you will save a lot of money.Also when you buy tell the clerk where you plan to lay it. You may want to buy a thicker laminate. You can use a thinner laminate in bedrooms but should be thicker in living rooms and hallways. Go for it,
1.00How do you remove laminate flooring that was put down and glued to the floor?
Q.I have this horrible laminate flooring in my house but it's hard to take off the sub-floor because the laminate is glued to the floor. I have been taking it out with a screw driver and hammer and it kinda damages the sub-floor. Is there a way to take out the laminate with little damage to the sub-floor?
A.That is a very tedious job. You will be sitting there forever with a pry bar though. You can also buy a floor scraper for about $20 at any hardware store. Generally found in the flooring dept.
Take my experience though, all depending on what you re-cover with (ie. tile, carpet, etc) if you are going with tile, you need to have a glue free surface. Plywood is inexpensive and easier to remove that your laminate, Not to mention the time and aggravation you will save.
1.00I have laminate flooring ( like pergo) made to look like hardwood flooring...and I need to clean it!!!!?
Q.So I was wondering if any one had laminate flooring ( mine is by company called Quick Step) and have tried to clean it with vineger? Does it work well? What is the recipe... I think I would much rather use a mixture of water and vinegar on my floors instead of chemicals because I have an 11 month old, and I am pregnant again! I am sorry but I don't buy the idea of cleaning with just water! Water is not a disinfectant! So please if anyone has tried the vinegar and water way of cleaning and it worked please let me know, and also how many parts water to the vinegar, and also what type of vinegar should I buy?
Thanks soooooo much!
-Concerned owner of new laminate flooring! :)
A.Here is a link on how to take care of laminate.
http://fortmyers.abbeycarpet.com/Products/Laminate/LaminateCare.aspx
Quick step is one of the best laminates, so you did a good job of selecting.
1.00I am looking at installing laminate flooring.?
Q.I am replacing carpet in my den as my dogs have peed everywhere and ruined the carpet. I am considering laminate flooring (armstrong), but need to know if the dogs pee if the urine will go through the "cracks"??
One installer told me no, another told me yes.
I was going to install tile, but that ended up being to $$$.
Thanks in advance.
A.The dogs will continue to pee on your laminate flooring and it will go through the joints causing your floor to swell up.Train your dogs to pee outside before you change the flooring.
1.00How can i change my laminate flooring to a white kind of floor?
Q.My living room is has laminate flooring but i would like to change it to white flooring permenantly. what is the best way to do this? i saw this item in ikea called floor lining would that work?
A.The lining actually goes under the laminate - so it wouldn't work. You would need to either paint the laminate with a primer then white floor paint - which is actually not a bad look - but you can't really use the floor until the paint cures - which is a few weeks, plus you will need to repaint every few years.
1.00Is it difficult for a person to install snap together laminate wood flooring,should we hire a professional?
Q.We are putting down the board like laminate wood flooring that snaps together & have been told it is easy to do . Does anyone know how to do it? We could use your help.
A.Hello, Just follow instructions that are on every pack, Tools needed , Fine tooth saw, square, ammer, stanley knife for scribing the line to be cut,rule and pencil, and common sense. Some you just snap together by hand, others have a driving tool to knock the laminate joints into one another. Just take your time, make sure before jointing up as to take apart again will damage laminate. Go for it.
1.00To fully install laminate flooring or leave areas carpeted for contrast....?
Q.I am pondering on the idea of leaving the bedrooms and stairs carpet, but installing laminate in hallways and family room/kitchen area. This would save me money if I did this and and still give people the taste of having laminate.
My only concern is, is this a home improvment faux paus? To me, it wouldn't look strange, but I am not an expert in home decor.
A.It is very common for bedrooms to have one flooring material and hallways and open spaces another. This is by no means a faux-pas, and it should look fine. The only thing you might want to consider doing differently is the stairs; because they are almost a part of the hallway you might want to consider changing the flooring on them as well -- a really nice touch would be to have a runner on the stairs with hardwood visisble at the sides.
When purchasing your laminate flooring, be very careful to look at quality as not all laminate floors are successful in a kitchen. Many laminate floors will swell significantly if anything spills on them, while others have "sealed edges" which prevent damage from being done so quickly. Good luck!
More Flooring Questions
Laminate Flooring
More and more >, KS area home owners who wish to have the look of a fine wood floor in their homes are choosing laminate flooring instead. These floors offer the beauty of a wood floor without the high cost or the pain staking maintenance. Laminates floors these days, are not restricted to artificial looking designs, but companies these days offer a range of laminate tile choices in natural looking stone and marble finishes. Almost all rooms in the house are recommended for installing laminate flooring, except for bathrooms, saunas or areas that required damp mopping.
Before installing your laminate floor, make sure that your sub floor is flat and smoothly laid out. Underlayment should be used under your floor for sound proofing purposes. Inspect flooring panels, and look for damage before installation, or else you could have uneven planks that can't be locked together. Choose a High Pressure Laminate that is more expensive, but offers a greater variety of designs, higher durability and enhanced inter locking mechanisms. Prices vary from the lowest end to high end ranges, and quality is usually determined by price.
Look for AC ratings to guide you in your choice of laminate floors. For high pressure areas like foyers and kitchens, laminate floors should have an AC 3 rating. Low pressure areas like bedrooms can get by with a lower rating. These ratings ensure that your laminate has passed all tests relating to staining, swelling, abrasion etc. Even so, a little maintenance will go a long way in keeping your laminate floor good looking for years to come. Protect your floor using rugs and mats, and make sure that all carpets used are made of color fast materials. Use furniture protectors to prevent your furniture legs from scratching your floors. Don't leave water standing on your laminate floor.
Sign Up!
List your services, get found on the major search engines.
Remodeling, Siding, Construction, Kitchen Remodeling, Carpentry, Sunrooms, Fire Damage Restoration, Bath Remodeling, Home Additions, Decks, Basement Remodeling, Finance and accounting, bookkeeping, tax preparation, outsourced controllership, Custom Garage Builder, Commercial Remodeling, Construction
Service Areas:
Arlington, Carrollton, Dallas, Denton, Euless, Fort Worth, Grand Prairie, Irving, Lewisville, Plano, Richardson, Weatherford, North Richland Hills, Burlington, Chapel Hill, Eden, Graham, Greensboro, High Point, Kernersville, Lexington, Mebane, Reidsville, Thomasville, Winston Salem, Asheboro, Addison, Asheboro, Bedford, Burleson, Burlington, Cleburne, Colleyville, Coppell, Crowley, Durham, Flower Mound, Greensboro, High Point, Highland Village, Keller, Lexington, Mansfield, Mebane, Mt. Airy, Raleigh, Saginaw, Southlake, Watauga, Winston-Salem
IRON NAIL BUILDING COMPANY is a licensed general contractor and full service building company based in Greensboro, NC. As a licensed/insured North Carolina contractor we are known as a builder of house additions, garages, commercial remodeling, home repairs & storage building construction and new construction across the state. Iron Nail Building Company is willing to handle all phases of your construction or repair needs. We offer the ability to provide you with interior and exterior home improvements as well as large scale building projects to meet your renovation and construction requirements.
In addition to our renovations and remodeling work, we offer custom garages and a full line of site-built accessory buildings (storage buildings). We have served hundreds of home owners across North Carolina, Virginia and South Carolina building custom garages and storage buildings to fit the needs of individual home owners and businesses. Because of the large number of requests for garages and storage buildings we have created a whole section dedicated to: Custom garages and storage buildings. Although our primary services are based in the piedmont triad (Greensboro, High Point, Winston Salem), we have the ability to cover the state of North Carolina in counties such as Guilford County, Randolph County, Forsyth County, Davidson County, Alamance County, Chatham County, Orange County. Because of our broad and extensive coverage area we take the time to research additional city/county codes and ordinances prior to any contracts to make sure your project goes as smoothly as possible.
Iron Nail Building Company desires to be the name you call on when your home or business requires renovation or repair. Because we are a family based business, we know the value of your home and business, and strive to provide a higher level of trust with all of our customers. Iron Nail Building Company works to provide our knowledge and service to you the customer with the wisdom you need to make quality decisions as to your next project, always keeping price and time lines in mind. We always stand ready to offer quality and timely free quotes for any of our general contractor services. From beginning to end our goal is to apply wisdom to every project we’re involved with. We are proudly ready to serve businesses, homeowners, churches, realtors, insurance agents, property managers and investors. If you are looking for a contractor or ready to start your next project give us a call to talk about your project. (336) 688-4774.
Are You a Pro?
List Your Services Here for Free!
Join Us!
Iron Nail Building Company
Areas Served:
Arlington, Carrollton, Dallas, Denton, Euless, Fort Worth, Grand Prairie, Irving, Lewisville, Plano,...
Our contractor partners happily serve the following suburbs and zip codes: Ansas City, Basehor, Belton, Bonner Springs, Buckner, Claycomo, De Soto, Edgeton, Edwardsville, Eudora, Excelsior Springs, Fairway, Farley, Ferrelview, Gardner, Gladstone, Glenaire, Grain Valley, Grandview, Greenwood, Holt, Houston Lake, Independence, K U Med Center, Kanas City, Kansa City, Kansas University Med Center, Kearney, Knasa City, Ks, Lansing, Lawrence, Lawson, Leavenworth, Leawood, Lee's Summit, Lenexa, Liberty, Linwood, Lone Jack, Misouri, Missouri City, Mosby, Napolean, North Kansas City, Oak Grove, Odessa, Olather, Overland Park, Parkville, Peculiar, Platte City, Plattsburg, Prairie Village, Raymore, Raytown, River Bend, Riverside, Roeland Park, Rosedale, Sibley, Smithville, Spring Hill, Sugar Creek, Swope Park, Trimble, Unity Vilage, Weatherby Lake, Wellington, Westwood, 66101, 66102, 66103, 66104, 66105, 66106, 66109, 66110, 66111, 66112, 66115, 66117, 66118, 66119, 66160
More and more 
Before installing your laminate floor, make sure that your sub floor is flat and smoothly laid out. Underlayment should be used under your floor for sound proofing purposes. Inspect flooring panels, and look for damage before installation, or else you could have uneven planks that can't be locked together. Choose a High Pressure Laminate that is more expensive, but offers a greater variety of designs, higher durability and enhanced inter locking mechanisms. Prices vary from the lowest end to high end ranges, and quality is usually determined by price.